How to make an outdoor movie screen in less than 1 hour for about $10…
A DIY outdoor movie screen. If you’ve been wanting a simple, budget-friendly way to enjoy an outdoor movie night, then you may give this tutorial a Siskel-Ebert style 2-thumbs up when the final credits roll!
The truth is, our kids have wanted us to make one of these for some time, but when we looked at the homemade movie screen concepts online, most were just too fancy for our needs.

We didn’t want one with a bulky frame to store, nor did we need one that would roll up or down. What we needed was a basic, inexpensive, portable outdoor projector screen that we could attach to the back of our house, and we could take inside and store when not in use so that the weather wouldn’t destroy it.
We made this outdoor movie screen in about 20 minutes…that included actually hanging it outside, and it cost about $10 to put together!
Let me show you how to make one for your home. Start with this quick video…

Here’s a quick video tutorial to help you make your outdoor movie screen
Oh, and before moving on, if you’re the type who loves decorating your home BIG time, but on a small-time budget? Then you’ll want to grab a free copy of “Builder-Grade To Beautiful: 10 Totally Transformative Home Decorating Solutions, All Under $100!” Click here or on the image below. Your copy will be sent right away!
Are you ready to make your own outdoor home theater screen? Well then, I say “lights, camera, action…let’s do this!”

Supply list for your DIY Outdoor Movie Screen
- blackout fabric (yardage will depend upon the size of your desired screen)
- grommets – we used 7/16″( you’ll need 1 per corner. If your screen will be very large, consider using more)
- sewing machine/plain white thread OR fabric fusion (for no-sew option)
- hammer/nails
- projector (important detail 😉). Ours is this brand, but an older model and it works great!
Regarding choosing your movie screen material: we used the least expensive blackout material we could find (typically in the ballpark of $4-8/yard). Ours is a poly/cotton blend, but an all-cotton variety would work just as well. Blackout material is made in white or ivory. Use white.

How to Make an Outdoor Movie Screen
1. Determine the desired size of your outdoor movie screen.
The size of the screen you want will determine how many yards of blackout fabric you need to purchase, as well as how many grommets you should use.
For a screen roughly 5′ wide or less, one grommet per corner should be used (a TOTAL of four). If you want a larger screen, you may want to add additional grommets along the top and bottom of the screen in the center to make sure the screen stays taut.

We decided on a 5′ widescreen based on the size of the area on the back of our home where we wanted the screen to hang. Blackout material is usually purchased in different widths, but we purchased the widest that is readily available, which is 54″.
Our overall screen size became about 5′ x 4.5″ (minus a couple of inches on each side for seam allowance). So for our screen, we needed 1.5 yards of blackout material.
2. Sew edges of the fabric (or go the no-sew route).
To sew, or not to sew, that is the question. For me, this was a couple of quick, straight seams on my sewing machine, and we were done. NOTHING fancy.

I folded the corners like I was wrapping a present, then just ran a straight seam along all four edges of the fabric. I’d recommend a seam between 1-2″ wide.
If you’re allergic to sewing, that’s ok. Just whip out that bottle of fabric fusion, and glue those seams. Your choice. Either works.
Pssst…remember! Don’t leave here empty handed! Grab a copy of “10 Totally Transformational Home Decorating Solutions – All Under $100” now. Click here or on the image below to grab yours now⤵️
3. Place grommets in corners.
Get out that little grommet kit and hammer away. If you’ve never installed a grommet before, now is your moment. It’s quick and easy, and the instructions will be in any kit your purchase. If you need a visual, watch the video tutorial toward the top of the post.
The gist is that a grommet has a front and a back. You sandwich the fabric between the two pieces, then whack the heck out of one side with a hammer…AKA a DIY’ers favorite form of stress relief!

Again, we used only 4 grommets for our screen, one per corner. But if you are making a very large screen, you may want to add additional grommets to keep the screen nice and taut when it’s hanging.
4. Install your outdoor screen.
We simply used a hammer and a couple of nails to affix our screen to the siding on our house. You can do the same if your home is brick, just make sure to use masonry nails. Nothing fancier than that.
It’s easiest to hang with two people so that one person can hold the fabric as the other person hammers.

*Tip: Put the nails in so that they end up being in the outermost corners of the grommet. This positioning will keep the screen held tight, rather than loose so that wind could affect the quality of the image being projected onto it.
*Bad Weather Bonus: You could easily use your new creation as a DIY indoor movie screen, instead, if the weather isn’t working in your favor! Just hang your movie screen on a wall inside. If your blackout material is lightweight, then you can probably get away with hanging it from a few thumbtacks. If it’s heavier blackout material, then you may need a couple of small nails instead.
*Wrinkles?: Just like any fabric, your screen will wrinkle a bit after it’s been folded and stored. Just throw it in the dryer for a little bit with a damp washcloth. It will take the wrinkles out without having to whip out an iron…because that’s no fun at all 😉.

5. Make the popcorn.
That’s it! Who wants to waste more time on making a theater screen, when there is popcorn to eat and movies to be watched!

And you’re outside…so grab the S’mores along with the popcorn. And don’t forget the tissues if your family picks a sad movie. I’m such a sap since having kids! Tell me I’m not alone!

Need more awesome, budget-friendly outdoor living ideas? Check these out, too:
- How To Make A Faux DIY Boxwood Wall in 5 Easy Steps
- Outdoor Lighting (AKA “can”-deliers)
- DIY Deck Makeover
- A Quick Summer Wreath Idea with Cocktail Umbrellas
- DIY Summer Napkin Holders from Dollar Tree
- Outdoor Curtains and Curtain Rods
- Turn a Potting Bench Turns DIY Outdoor Bar Cart
- 53 BEST DIY Vertical Garden Ideas
- Painted DIY Outdoor Rug Tutorial
- 25 Creative, Coastal DIY Seashell Craft Ideas to Make!
- 6 Easy DIY Mosquito Trap Ideas (That Actually Work)
Pin this post for later! And if you make one, leave a comment (or better yet, a photo) on the pin! That helps others know whether they want to try this project, too!

Pssst…before you go, I sure would love to hang out with you again really soon! Sign up now and get a FREE copy of “Builder-Grade To Beautiful: 10 Totally Transformative Home Decorating Solutions, All Under $100!” Click here to enter your email or on the image below. Your copy will be sent right away!

Toni says
What projector are you using?
Heather says
Hi Toni, it’s linked in the supply list 🙂
amy says
will this work over a window? I have an enclosed patio with a window that is perfect and only spot to put it unless I use the screen enclosure panel/ wall that’s on other side of window…. The other wall to house is French doors/double entry doors. thks
Heather says
Hi Amy! As long as the lights inside the house are off, it should work ok! If I were going to do it like that though, I’d buy a thicker/heavier blackout fabric to use…or double up the thinner kind 🙂
Neeta says
Thank you for this tutorial. Like you, I wanted a smallish screen that I could attach to the side of the garage. It worked out perfectly.