How to make a DIY stocking holder…
My crafty gene always turns on at one and only one time during the year. And that’s over the holidays. You know anyone like that?
And the latest Christmas crafty venture? A DIY stocking holder made with vintage skis!
*This DIY stocking holder project is sponsored by The Home Depot DIY Workshop*
PERFECT idea if you live in a condo, or a home without a chimney on which to hang junior and Susy Loo Hoo’s stockings with care…this little DIY will have you covered, so Santa will know EXACTLY where to leave that new puppy (insert parental worried emoji here).
DIY Stocking Holder Supplies
- 4″x4″ post
- finial/post capof choice
- power drill driver
- 2″ish screws
- 2’x2′ plywood square (for base)
- paint/stain of choice
- vintage skis/ “rock” skis
- palm or belt sander(to knock down any splintery edges on post)
DIY Stocking Holder Video Overview
How to assemble your DIY Stocking Holder
1. Screw plywood base to 4″x4″ post.
2. Attach finial to 4″x4″ post.
The finial will simply screw onto the 4×4 post.
3. Sand post.
We wanted to paint our post, so to prep it, we just gave it a super quick, light sanding with the palm sander.
4. Paint post, if desired.
After sanding, we spray-painted the post white.
We were able to get a couple of sets of vintage skis from Craigslist for $30. Truth be told, they aren’t the nicest looking, but if I come across some gorgeous old wood skis someday, I’ll happily swap these out.
5. Cut skis to length.
We removed the bindings, then we cut the skis to the desired length based on the height of our post. Since skis are built pretty sturdily (at least the newer varieties) you’ll likely need a special blade to cut them.
We ended up using a sawzall with a carbide-tipped blade, and that worked really well.
6. Screw skis to post.
Screw both sets of skis to the post to completely encompass your 4×4 post.
7. Install stocking hooks onto your DIY stocking holder.
Once the skis are attached to the post, it’s time to screw your chosen hooks to the skis/post.
8. Hang your stockings on your post with care…
in hopes that St. Nicholas soon will be there! Voila! We’re ready for Christmas Eve!
You could also use this creation for all kinds of wintery things…like scarves, the kids’ winter coats…
Or maybe to hang your cozy winter blankets?
It’s pretty fun and festive, I think. Want to make one too? You should! Here’s to a merry and bright holiday season for us all!
It was a ton of fun working with this group of talented DIY and home bloggers, each creating their own version of this fun project with you!
Tasha, Designer Trapped in a Lawyer’s Body
My Altered State
Lazy Guy DIY
The Chronicles of Home
Pin this DIY stocking holder for later! Made one? Leave a comment, or better yet, a picture of your completed project on the pin! That helps others decide if they’d like to try this project, too!
Pssst…before you go, I sure would love to hang out with you again really soon! Sign up now and get a FREE copy of “Builder-Grade To Beautiful: 10 Totally Transformative Home Decorating Solutions, All Under $100!” Click here to enter your email or on the image below. Your copy will be sent right away!
This project is simply gorgeous. As for your additional add on’s, you nailed it!
Lindsay @ The DIY Mommy says
These are seriously the cutest!! LOVE LOVE this idea